boviniequini

CATTLE processing machines

For further information or a quote

STEEL BOVINE BRIDLING TRAP

USE: it is used to immobilize the bovine before the slaughtering.

DESCRIPTION: the trap is made of stainless steel AISI 304 welded tubulars and covered by stainless steel sheet. It is provided with back and lateral sash doors, both with hydraulic functioning activated by the operator. The bottom of the trap is made of anti-slip metal sheet and equipped with feet and plates to anchor the trap to the floor. Hydraulic plant is composed by the following elements:

  1. pneumatic cylinders for lateral and back opening
  2. manual valves
  3. reducer for filtering, lubrication of the moving parts and regulation of the pressure according to the functioning needs.

Dim. of the trap: 3475x1855xh3445 mm

 

CRADLE FOR KILLED BOVINE

USE: it is used to hold the bovine once it has been unloaded from the trap and to make it adopt a specific position before being lifted

DESCRIPTION: it is composed of strong metallic tubular and a covering sheet. All metallic parts are hot deep galvanized.

 

BOVINE ISLAMIC TRAP

It is constituted of a strong metallic carpentry built by using UPN beams and shaped thick sheets, electro-welded and hot galvanized. The trap has a hydraulic functioning and movements.

The movements of the trap are the following:

  • Opening/closing of the entry sash door
  • Opening/closing covers bovine's back
  • Opening/closing bovine's neck
  • 180° rotation of the bovine
  • Opening lateral side of the box and unloading of the animal

The trap is complete with:

  • Locking device for the bovine's legs inside the trap
  • Wider opening of the trap
  • Regulation of the hydraulic lateral side
  • Locking device for the animal face
  • Falling and bleeding cradle made of zinc-coated tubular
 

ELECTRIC RETRACTOR

USE: it is used to open the hind legs of the animal in order to favorite the operations on the carcass (skinning, evisceration, splitting).

DESCRIPTION: it is constituted by a bearing plate where all the accessories and the gear-motor are fixed. The gear-motor activates the skids that will hook the pulleys bearing the carcasse. The electric device is fixed on the support structure of the processing rail. All metal parts are electrolytic galvanizes. It is complete with electric switchboard with button-controlboard at low voltage.

 

PEDANA DI EVISCERAZIONE PNEUMATICA INOX

USE: it is used to facilitate the operations of evisceration.

DESCRIPTION: it is made of stainless steel AISI 304 tubular frame and it is composed by the following elements:

  1. Fixed part
  2. Mobile platform
  3. Pneumatic system to control the platform
  4. Electric system to control the knives sterilizer

The fix part is made of two stainless steel vertical tubular opportunely welded and horizontal one that act as frame and rail for the mobile platform. The mobile platform is composed by: two stainless steel vertical tubular where polyethylene journal boxes are attached to facilitate the sliding; a base made of stainless steel tubular with aluminum or stainless steel anti-slip stamping plan. The pneumatic system is composed by: pneumatic cylinder; 2 foot pneumatic valves to move up and down; distribution valve; 2 safety valves; pipes and accessories for the assembling. The electric system is composed by: electric resistance; thermostat, analogue thermometer to check the sterilizing temperature. Stainless steel slide is set under the stamping plan; is slides pneumatically, set on a slope and back wall that can be opened pneumatically. OPTIONAL: sink sterilizer with knee-mixer for the operator, complete with electric and water connections.

 

INSERTER PULLEY BOOTLACE

It is constituted by a steel mobile arm, a pneumatic piston and an electric valve commanded by the operator. Once that the bootlace is at altitude, the operator, activating the mobile arm, moves the pulley bootlace into the bleeding rail. All the metallic parts, except for the piston, are hot deep galvanized.

 

DESCENDER BOVINE PULLEY BOOTLACE

USE: it is used to descend the pullet bootlace on the ground from the aerial rail of return.

DESCRIPTION: it is constituted by a pneumatic cylinder, a 180° bend-chain and a mobile pulley-bearer device that is anchored to the chain. The pneumatic piston is controlled by the operator through a specific valve. All parts are hot deep galvanized. The machine is provided with two pneumatic end stops that block the pulley and make it pass one by one.

 

PNEUMATIC STOP

USE: it is used to stop the pulley along the bleeding or processing rail.

DESCRIPTION: it is constituted by an "L" section bar anchored to the rail (mono-rail or bi-rail). A pneumatic cylinder, that control a mobile fork, is hinged to the section bar. The fork stops the passing pulley and, through a pneumatic activation, allow the passage of the pulleys one by one. Opening and closing of the fork is controlled by a pneumatic system. The metallic structure is hot deep galvanized.

 

PNEUMATIC PLATFORM OF SPLITTING

USE: It is used to favorite the splitting operations.

DESCRIPTION: it is made of stainless steel AISI 304 tubular frame and it is composed by the following elements:

  1. Fixed part
  2. Mobile platform
  3. Pneumatic system to control the platform
  4. Electric system to control the knives sterilizer

The fix part is made of two stainless steel vertical tubular opportunely welded and horizontal one that act as frame and rail for the mobile platform. The mobile platform is composed by: two stainless steel vertical tubular where polyethylene journal boxes are attached to facilitate the sliding; a base made of stainless steel tubular with aluminum or stainless steel anti-slip stamping plan. The pneumatic system is composed by: pneumatic cylinder; 2 foot pneumatic valves to move up and down; distribution valve; 2 safety valves; pipes and accessories for the assembling. The electric system is composed by: electric resistance; thermostat, analogue thermometer to check the sterilizing temperature. The platform is provided with a sterilizer sink complete with knee-mixer for the operator.

 

BIG SKINNING PLATFORM FOR BOVINE

USE: it is used to facilitate the skinning operation.

DESCRIPTION: the big platform is made of two fixed supporting tubes that act as guide for a mobile platform. The mobile platform moves thanks to hydraulic system. It is provided with: a central hole to allow the passage of the animal, stainless steel or aluminum anti-slip stamping plan, side-handle and back protection according to the current norms. The platform movements can be controlled through a button-board or pedal-board. The whole structure of the platform is in stainless steel AISI 304.

 

NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I understand
SINT TECNOLOGIE S.r.l. © 2018 - Sede Legale: Località Molino, scn 62020 - MONTE SAN MARTINO (MC) - Tel. +39 0733 660132 - Fax +39 0733 660458 - P.IVA / Cod. Fisc. / ISCR. REG. IMP.: (MC) IT 01141460434 - Capitale Sociale: 118.000,00 € I.V. - Informativa Privacy