suini

PIGS processing machines

For further information or a quote

STUNNING PINCERS

USE: it is used to stun the pig through electro-narcosis. CE REGULATION CE 1099/2009 with MANUAL IMPEDANCE LOAD.

DESCRIPTION: pincers have a plastic grip; stainless steel electrodes; electric switchboard with isolating and safety transformer according to CEI 14-6 regulation. It is provided with an electronic device that measures the impedance of the animal and avoid the functioning whether the electricity is not enough for a correct stunning. It guarantees the maximum safety for the operator.

 

PROFESSIONAL STUNNING PINCERS

USE: it is used to stun the pig through electro-narcosis. CE REGULATION CE 1099/2009 with MANUAL IMPEDANCE LOAD.

DESCRIPTION: Professional pincer with plastic grip, stainless steel electrodes, electric switchboard of considerable dimensions with transparent door and N° 2 strong opening handgrips. The switchboard contains an empowered isolation transformer whose prime is connected to the supply network (230 volts alternate); while the secondary (with tension higher than 200V) is connected to the pincer. The power of the transformer is adequate to stun bovine, too. It is suitable for medium-high production slaughterhouses.

 

BLEEDING LINE

USE: it is used to transport and bleed at the same time the pig from the bridling trap to the scalding tank.

DESCRIPTION: it is composed of stainless steel AISI 304 profiles frame and strips in polyethylene suitable for food that are anchored directly to the transport chains. Movement is obtained through an electric motovariator that transmits the motion to the axle through a chain transmission. Both axle and driven shaft are set on swinging supports where crowns are fitted; chains engage on the crowns. Belt is provided with: two stainless steel tanks set below it, one for blood collection and one for washing water for the pigs before it enters in the scalding tank; washing shower set at the end of the belt and lateral edges to hold the pig. The belt is made of stainless steel AISI 304 excluding the transmissions, that are electrolytically zinc-coated. Length varies according to the capacity of the plant.

 

SCALDING DEHAIRING MACHINE ONE ROLL

The structure of the machine is in stainless steel. Water spilling and hair removal are carried out at the same time while the machine is hermetically closed. The cover has two parts and is provided with two handgrips: it is opened on the front to introduce the pig and on the back to facilitate the cleaning operations.

During dehairing operation, pig is on rubber razors at a height that allows the easy exit of the animal. Hair removal is perfect thanks to razors specifically designed for the purpose. A grate catches the hair from the water, so water is always clean, while a discharge device guarantees the outflowing of dirty water. Thermostat and thermometer control the water temperature; a timer controls the cycle duration. The machine is provided with 4 wheels (2 of the them are revolving) to move it easily but during its functioning, it is positioned on 2 feet adjustable in height; the free space between the machine and the ground allows the cleaning of the floor without moving the machine.

 

SCALDING TANK W/ ROTOR

USE: it is used to scald the pig before being de-haired.

DESCRIPTION: Scalding tank is made of stainless steel sheet molded and welded, completed insulated through rockwool. Water heating is obtained through direct input of steam thanks to suitable injectors. It is provided with probe, water charge and discharge, overflow. Complete with zinc-coated steel rotor system for the automatic advance of the pigs. Electronic setting of the temperature through probes and valves included. Dimensions and number of compartments vary according to the capacity of the plant.

 

SCALDING TANK

USE: it is used to scald the pig before being de-haired.

DESCRIPTION: Scalding tank is made of stainless steel sheet molded and welded, completed insulated through rockwool. Water heating is obtained through direct input of steam thanks to suitable injectors. It is provided with probe, water charge and discharge, overflow. Complete with zinc-coated steel rotor system for the automatic advance of the pigs. Electronic setting of the temperature through probes and valves included. Dimensions and number of compartments vary according to the capacity of the plant.

 

BLEEDING ROLLER WITH TIRES

 

PIGS DEHAIRING MACHINE P70

USE: it is used to dehair the pig after the scalding phase.

DESCRIPTION: it is made of opportunely molded and welded sheet frame. The cradle is made of thick molded sheets that allow a good rotation of the pig during the dehairing phase. Dehairing axle has 56 spatulas and is set on bearing supports. Motor transmit the rotation to the axle through trapezium belts transmission. Pneumatic inserter, made of flat profiles welded on an axis, allows the transit of the pig from the scalding tank to the dehairing machine. Pneumatic ejector, made of opportunely molded tubular, allows the exit of the pig from the dehairing machine to the finishing table. PVC panels set on both the front and back part of the machine protect the operator from squirts of hair and water. Shower plant inside the machine facilitates the pig dehairing and washing operations. The machine is supplied with the compressed air plant composed of:

  1. Pneumatic cylinders for the ejector and cradle
  2. Air-deviant valves
  3. Lubri-filter-reducer for the filtering.
 

SCALDING DEHAIRING MACHINE 2 ROLLS

USE: it is used to scald and dehair the pig.

DESCRIPTION: it is entirely made of a strong stainless steel structure. Water heating system functions through diathermic oil resistances. Dehairing obtained through 2 rollers with rubber spatulas annexed. Pig ejecting system through lever. Hair collector. The machine can be moved through 4 wheels and positioning through adjustable feet. The machine is suitable for big sized pigs (300/350 kg).

 
SINT TECNOLOGIE S.r.l. © 2018 - Sede Legale: Località Molino, scn 62020 - MONTE SAN MARTINO (MC) - Tel. +39 0733 660132 - Fax +39 0733 660458 - P.IVA / Cod. Fisc. / ISCR. REG. IMP.: (MC) IT 01141460434 - Capitale Sociale: 118.000,00 € I.V. - Informativa Privacy - Cookie
Utilizziamo i cookie per assicurarti la migliore esperienza nel nostro sito.
Questo sito utilizza i cookie, anche di terze parti, per inviarti messaggi promozionali personalizzati.
Per saperne di più, conoscere i cookie utilizzati dal sito ed eventualmente disabilitarli,clicca qui.
Chiudendo questo banner, scorrendo questa pagina o cliccando qualunque suo elemento acconsenti all’uso dei cookie OK